Tuesday, January 5, 2016

Faux Stone Plaque

Welcome, and Happy New Year!



This month I'll be showing you how to make a "stone" plaque for the garden, so even if it is snowy and cold outside, you can think about Spring planting and garden decor.

To make the plaque you'll need:

Creative Paperclay® modeling material
a work board or sturdy cutting board you can leave the clay on while it is drying
plastic scraper or credit card
small flat scraper or sculpting tool (one can be easily made from sharpening the end of a "popsicle" stick)
card stock or light cardboard
dimensional paint
gesso
acrylic paints in browns and greys
exterior varnish
a plastic straw
rolling pin
craft knife
tape
wire or twine for hanging your plaque
tracing paper, pencil
small paint roller
large bristle paint brush
pattern


















Make your stamp first -

Trace the center design section of the pattern and transfer it in reverse onto cardboard.  Go over the lines with dimensional paint, then set aside to dry.  You may wish to go over some of the lettering, such as the word "SMILE" twice to give it added depth.








Roll clay out on your work board to a 3/16" thickness.  Trace pattern edges and holes onto tracing paper and transfer to clay.
















Using your craft knife, cut into the clay slightly, then wet the center of the work piece and start scraping out and removing clay.  Continue scraping out the center section to a depth of about 1/8"













Use the edge of the small scraper to clean up the edges of the area you scraped out.






























Add some tape to the back of your cardboard stamp and check the fit.  Trim the interior section of the clay as necessary until the stamp will fit inside, then carefully press the design into the clay.




























Press the straw all the way through the clay to cut holes where indicated.

Now start the stone texture by gently rolling over the entire piece with the paint roller.  Be careful around the lettering and don't press too hard with the roller (start on the edge to see how much pressure you need just to make very slight indentations all over the piece).

Use the paintbrush to texture along the inside edge, and press the bristles in randomly along the edges of the piece to create more texture.  If desired, use the craft knife to add some cracks in the stone and some more dimension.

Allow the clay to dry on the board.  It may take several days to dry - be sure not to remove it until it is completely dry or the piece might warp.
















When the piece has dried, remove it from the board and coat all surfaces with gesso.  Allow the gesso to dry, then begin painting with a wash of warm brown acrylic paints.















When the brown wash has dried, paint the piece with a wash of darker brown and grey.  Allow the dark color to flow into all the lettering.  Let dry.  Continue alternating washes until you are satisfied with the piece.  Remember that it will appear much lighter when it is out in the sun!












When the paint is dry, coat the piece with exterior varnish.  Add some "rusty" (mine is painted with burnt umber, black, and burnt sienna for rust) wire or twine and find a sunny spot to hang up your work!

Thanks for joining me here again!




I'd love for you to join me for more projects & art adventures on my personal blog
Find me on Facebook, or peruse & ponder pics with me on Pinterest

5 comments:

Lori Bradford's art said...

This is a lovely project. I had to go back and check again how you made a stamp on cardboard, Dimensional Paint! You are so Smart!!
There are so many possibilities for words and sizes of plaques. You have ideas floating around in my head like crazy.

Jan Conwell said...

I love this idea--thank you.

Tamara Dozier said...

This is an awesome tutorial and one I will be incorporating into my work! Thank you for sharing.

Tori West said...

Thank you for the nice comments! I'm glad you enjoyed the tutorial.

SandeeNC said...

This is fabulous, love it!